Grow Tools • Measurement & Control
Cannabis pH & TDS/EC Meter Kit with ATC
Lock in the sweet spot for nutrient uptake. This kit pairs a digital pH meter (0–14) with a 3-in-1 TDS/EC/Temperature tester and ATC, so you can prevent nutrient lockout, hit target ppm, and boost yields in soil, coco, and hydro.
Why Growers Choose It (Cannabis-Focused Benefits)
-
Optimize Nutrient Uptake: Keep solution in the cannabis pH “sweet spot” (Soil: 6.0–7.0, Hydro/Coco: 5.5–6.5) to avoid lockout and deficiencies.
-
Dial-In Feeding by Stage: Track ppm/EC to match growth phases:
Stage |
Target PPM (500 scale) |
Seedlings |
300–400 |
Vegetative |
600–1000 |
Early Flower |
900–1200 |
Mid/Late Flower |
1000–1600 |
-
Consistent Accuracy with ATC: Automatic Temperature Compensation stabilizes pH/EC readings even when reservoir temps fluctuate.
-
Better Potency & Terpenes: Balanced solution supports resin production, aroma intensity, and overall plant vigor.
-
All Methods, Any Scale: Perfect for tents, rooms, DWC, RDWC, drip, and hand-watered runs.
What’s Included
- Digital pH meter (range 0.00–14.00)
- 3-in-1 TDS/EC/Temperature meter
- Protective carrying case
- Calibration buffers (pH 4.01 / 6.86 / 9.18)
- Quick-start guide
Core Specs
-
TDS Range: 0–9,990 ppm
-
EC Range: 0–9,990 μS/cm
-
Temp Range: 0.1–80.0 °C (32.0–176.0 °F)
-
Accuracy: ±2% (TDS/EC)
-
ATC: Yes (pH & EC)
- Note: not for seawater/saline solutions.
How to Use (Soil, Coco, Hydro)
-
Calibrate the pH meter with supplied buffers (fresh powders mixed with distilled water).
-
Mix Nutrients to your recipe, then measure EC/ppm. Adjust strength to target range.
-
Set pH: Measure solution pH and adjust with pH-up/down in small increments; re-test until on target.
-
Water & Log: Feed plants and record pH/ppm so you can repeat wins and diagnose issues quickly.
-
Rinse & Cap: After each use, rinse probes with clean water and cap to extend sensor life.
Specifications
pH Range |
0.00–14.00 pH |
TDS Range |
0–9,990 ppm |
EC Range |
0–9,990 μS/cm |
Temperature |
0.1–80.0 °C (32.0–176.0 °F) |
Accuracy |
±2% (TDS/EC) |
Power |
Battery (included) |
Form Factor |
Handheld, lightweight, pocket-size |
Care & Calibration
- Calibrate pH weekly during heavy use, or bi-weekly for light use.
- Rinse probes with distilled water; do not scratch or wipe aggressively.
- Store pH electrode moist (per manufacturer guidance) to preserve accuracy.
FAQs
Q: What pH should I run in coco?
A: Target 5.8–6.2 for most feed schedules.
Q: Why are my leaves clawing after a feed?
A: Likely over-fertilization—check ppm/EC and reduce to the table above.
Q: Do I test runoff?
A: Yes—periodic runoff checks help spot salt buildup and root-zone imbalance.
Pro Tip: Keep reservoir temperature ~65–70 °F (18–21 °C) to support oxygen levels and stable readings.